Ingram Equipment Company

Sectional  Barge  Sale

Our Flexi-Float, Rendrag, Poseidon, Shugart Style connections will match up to your own Flexi-Float, Rendrag, Poseidon, Shugart sectional barges excellently. Or you can choose to use our locking connections similar to Shugarts but once you see them even a non engineer like myself, can see our connections are clearly better, just like our sectional barges, Pusher Tugs, Tug Boats, Casino’s hotel barges, River Boats.  

All of our barges come with Free Connecting Mechanisms, Free Man-Way hatches installed, 4-corner or center lift rings and raked barges of any size are the same price as the length of the barge you choose.

After doing an excellent job of welding our barges completely, inside and out, then we completely epoxy coat the inside and then we install the man-way hatch. Our man-way hatches allow storage of equipment, tools, materials and if you run aground, you can inspect for leaks, holes, from inside the barge without cutting open the deck. Should you accidently run into logs, debris, rocks, running aground or being dropped while being handled, our structure is better.

Description

Length----40’----------------------------------- Beam--10’-----------------------Hull Depth---------5’

Your Cost Each----------------------------------------------------------------------------------------------------$   35,500-usd

Total Qty 12---------------------------------------------------------------------------------------------------------$ 426,000.usd

Length----20’----------------------------------- Beam--10’-----------------------Hull Depth---------5’

Your Cost Each----------------------------------------------------------------------------------------------------$   21,500-usd

Total Qty 20---------------------------------------------------------------------------------------------------------$ 421,000-usd

Length----40’----------------------------------- Beam--10’-----------------------Hull Depth---------7’

Your Cost Each----------------------------------------------------------------------------------------------------$   42,000-usd

Total Qty 12---------------------------------------------------------------------------------------------------------$ 504,000-usd

Length----20’----------------------------------- Beam--10’-----------------------Hull Depth---------7’

Your Cost Each----------------------------------------------------------------------------------------------------$   21,500-usd

Total Qty 20---------------------------------------------------------------------------------------------------------$ 156,000-usd

Raked Barges 

1. Length----40’ long raked side beam,---40’ long raked bow beam------------- Hull Depth-----5’------$  35,500-usd

2. Length----40’ long raked side beam,---40’ long raked one side beam------- Hull Depth-----7’------$  42,000-usd

3. Length----20’ long raked side beam,---20’ long raked bow beam------------- Hull Depth-----5’------$  21,500-usd

4. Length----20’ long raked side beam,---20’ long raked one side beam------- Hull Depth-----7’------$  24,500-usd

5. Length----10’---------------------- beam,---10’-------------------------------------------- Hull Depth-----5'------$  12,500-usd

6. Length----10’---------------------- beam,---10’-------------------------------------------- Hull Depth-----7'------$  14,500-usd

Approximate weight of our products

1. 40’ x 10’ x 5’               @  23,000-lbs

2. 20’ x 10’ x 5’               @  12,600-lbs

3. 10’ x 10’ x 5’               @    6,500-lbs 

4. Rakes Spud Pockets  @    1,250-lbs

5. 18” x 40’ Spuds         @    4,400-lbs

6. 18” x 30’ Spuds         @    3,300-lbs

7. 18” x 20’ Spuds         @    2,200-lbs

8. Connection Pins       @         55-lbs

9. Spud Winch              @    4,500-lbs

10. Single Sea-Bee          @    6,500-lbs

11. Twin Sea-Bea            @    9,500-lbs

12. Cleats                        @         60-lbs

13. Drill Spacers             @       215-lbs

Length 25’ 6” 

Beam 8’, 10’ or 12’

Hull Depth 3’

Single  Screw (150-hp  to  250-hp)   Single Screw  110,000 -  135,000-usd

Twin - Screw (150-hp  to  400-hp)   Twin Screw up to  185,000-usd

Length 25’ 6”

Beam 8’ thru 12’

Hull Depth 5’

Single Screw 330 HP

Length 39’ Beam 19’ Hull Depth 5’ 6” Eye Level 21’

Twin Screw 810 HP Total 36” Five Blade Props Fuel Cap 1064 Gal.

(1) 20 KW Gen Set (Rest Room, Galley Area, Quarters Area)

Cost to Construct Fully Loaded: $ 720,000.00

Other Available Truckable Products:

1) Sectional Barges 40’ x 10’ x 5’ and 40’ x 10’ x 7’ or Custom

2) Truckable Fuel or Liquid Barges 10,000 Gallon Capacity or Custom

3) Truckable Split Dump Hopper Barges

4) Truckable Hopper Barges

5) Split Hull Tug Boats to make larger vessels truckable

6) Custom Docks or Misc. Barges

7) Custom Truckable Tugs, Dread Tenders and other Vessels

Length 39’ Beam 19’ Hull Depth 5’ 6” Eye Level 21’

Twin Screw 810 HP Total 36” Five Blade Props Fuel Cap 1064 Gal.

(1) 20 KW Gen Set (Rest Room, Galley Area, Quarters Area)

Cost to Construct Fully Loaded: $ 720,000.00

Other Available Truckable Products:

1) Sectional Barges 40’ x 10’ x 5’ and 40’ x 10’ x 7’ or Custom

2) Truckable Fuel or Liquid Barges 10,000 Gallon Capacity or Custom

3) Truckable Split Dump Hopper Barges

4) Truckable Hopper Barges

5) Split Hull Tug Boats to make larger vessels truckable

6) Custom Docks or Misc. Barges

7) Custom Truckable Tugs, Dread Tenders and other Vessels

Join Ingram Equipment Company for free and you will have the ability to show pictures of your equipment around the world, by way of the Internet through our Web Site, at no cost to you for as long as you want or until it sells. As a Dealer/Equipment Broker, we will only charge the buyer, when a sale occurs. There is no charge to the seller.

This is our Main Menu or click this List for Equipment and Materials that we sell. For a list of equipment and/or materials that are needed now by contractors/dealers/brokers or that have just come in and are for sale.

Special sectional jack-up barges

2-1988 Flexi-Float sectional, S-70 series Jack-up Barges, 80'(24.4m)x 60'(18.3m)x 7'(2.13) 

completely, 1-overhauled 1999. Jacking system, Rexroth hydraulics, 4-hydraulic mooring winches 

w/10-tons of line pull,  80' or 90' long x 4' dia. spuds, 2-deutz (F6L-912) diesel engines and rated at 

330-Tons (300-mt) for a Manitowoc 4100, rental is $55,000-mth. w/a minimum of 12-mths. 

Lease with an option to buy or make an out right purchase for					          $ 

 Here is a Currency Converter to help you convert our USD price to your currency.